Extremly resistant & usable for shooting simulators*@contentTea>
No impact on accuracy through heat due to a grade 5 Titanium core@contentTea>
Optimized for game tracking & driven hunt, compatible with night vision devices**@contentTea>
Maximum recoil reduction (prevents fear through gun shoot noise, suitable for big bore calibers)@contentTea>
Non-slip, non-reflective surface & Titanium core with 10 years guarantee@contentTea>
Developed & tested by hunters to last a lifetime@contentTea>
*To prevent overheating only limited follow up shots should be fired. ( Only use factory made ammunition. Cal. ≤ 6,5mm: max. 15 shots; Cal. ≤ .30(7,62mm): max. 25 shots; Cal. ≤ .375(9,3mm): max. 15 shots.)
Before starting another series of shots, the damper must be cooled down to hand temperature.
**(Non impacted field of view, due to extravagant design)
Customer Voices
No boom, no bang. As a passionate hunter and marksman at home and abroad, I have been using rifles in .300 WinMag, .338 WinMag and 8x57 IRS calibers for 30 years, primarily for raised hide, stalking and driven hunts.
In favor of the performance, I accepted the side effects such as recoil and high impact. Since I mounted the Krontec OR's on my rifles, I have entered a new form of hunting life. High impact, recoil, muzzle flash and loud shot bangs are almost completely gone. With each shot I look through the (no longer existing) fire and can consciously perceive each drawing of the shot game. I am back on target faster and can safely apply another shot during driven hunts. With a red dot sight or a low mount, I have no impairment of the field of view. Under poor visibility conditions when night hunting, I can get the full performance of the optic.
The easy mounting and cleaning allow the use of a silencer on multiple guns, for example abroad when two rifles are in the luggage and weight needs to be saved. I experience hunting and my proven rifles with the Krontec OR's completely new - great! @contentTea>
No boom, no bang. As a passionate hunter and marksman at home and abroad, I have been using rifles in .300 WinMag, .338 WinMag and 8x57 IRS calibers for 30 years, primarily for raised hide, stalking and driven hunts.
In favor of the performance, I accepted the side effects such as recoil and high impact. Since I mounted the Krontec OR's on my rifles, I have entered a new form of hunting life. High impact, recoil, muzzle flash and loud shot bangs are almost completely gone. With each shot I look through the (no longer existing) fire and can consciously perceive each drawing of the shot game. I am back on target faster and can safely apply another shot during driven hunts. With a red dot sight or a low mount, I have no impairment of the field of view. Under poor visibility conditions when night hunting, I can get the full performance of the optic.
The easy mounting and cleaning allow the use of a silencer on multiple guns, for example abroad when two rifles are in the luggage and weight needs to be saved. I experience hunting and my proven rifles with the Krontec OR's completely new - great!
I have never had a silencer that dampens the blast so well and at the same time has such a positive effect on the recoil behavior of the rifle. Fewer reflections when using an IR brightener make the Krontec silencer the first choice for me. A game changer in the field of silencers ...
I have never had a silencer that dampens the blast so well and at the same time has such a positive effect on the recoil behavior of the rifle. Fewer reflections when using an IR brightener make the Krontec silencer the first choice for me. A game changer in the field of silencers ...
Test measured values
Measured values of the silencer KRONTEC OR-50
To the results
Measured values of the KRONTEC OR-60
To the results
Measured values of Hausken
To the results
Measured values of Blaser
To the results
OR-50 and OR-60
The Krontec silencer is available in 2 different versions, which are QR-50 and QR-60. Moreover both silencers are build on a modular basis and available with different threads, as well as 4 different caliber groups.
OR-50 and OR-60
The Krontec silencer is available in 2 different versions, which are QR-50 and QR-60. Moreover both silencers are build on a modular basis and available with different threads, as well as 4 different caliber groups.
M14x1
M15x1
M17x1
UNEF 5/8"-24
UNEF 1/2"-28
UNEF 1/2"-20
M18x1
We recommend the QR-60 for Magnum cartridges and cartridges with a lenght of more than 60mm.
We recommend the QR-60 for Magnum cartridges and cartridges with a lenght of more than 60mm.
Silencer accessories
Link to the front sight and lamp mounting point
Link to the front sight and lamp mounting point
The multitool is included with every KRONTEX silencer and can be used to mount, adjust and dismantle the silencer.
User manual
The multitool is included with every KRONTEX silencer and can be used to mount, adjust and dismantle the silencer.
User manual
Mounting & Cleaning
Mounting & adjusting the silencer
The silencer needs to be mounted so that the line os sight is free. • Use the multitool to adjust the position of the silencer • Screw the silencer on thight @contentTea>
• Plug the multitool into the firing hole and unfasten the damping element with 3 turns@contentTea>
The silencer needs to be mounted so that the line os sight is free. • Use the multitool to adjust the position of the silencer • Screw the silencer on thight @contentTea>
• Plug the multitool into the firing hole and unfasten the damping element with 3 turns @contentTea>
• The silencer will move forward and can be adjusted in line with the pistol grip using the markings in front of the silencer @contentTea>
• The silencer will move forward and can be adjusted in line with the pistol grip using the markings in front of the silencer @contentTea>
• Push the silcencer down, until it locks in place and fasten the damping element. Make sure that the damping element and the end cap of the silencer are on the same level • The silencer will remain in position, if used with the same rifle @contentTea>
• Push the silcencer down, until it locks in place and fasten the damping element. Make sure that the damping element and the end cap of the silencer are on the same level. • The silencer will remain in position, if used with the same rifle.@contentTea>
Cleaning and assembly of the silencer
The silencer shlould be cleaned every 80-100 rounds fired, under hunting conditions. • Use the multitool to dismantle the silence • Clamp the multitool into a vice a vice if the endcaps can not be unfastend manually • Unfasten the endcaps @contentTea>
The silencer shlould be cleaned every 80-100 rounds fired, under hunting conditions. • Use the multitool to dismantle the silence • Clamp the multitool into a vice a vice if the endcaps can not be unfastend manually • Unfasten the endcaps.@contentTea>
• Plug the multitool into the firing hole to unfasten the chamber element @contentTea>
• Afterwards the chamber can be removed from the chamber element @contentTea>
• Plug the multitool into the firing hole to unfasten the chamber element @contentTea>
• Afterwards the chamber can be removed from the chamber element. @contentTea>
• The damping element can bue cleaned by submerging it in water with a detergent or in a ultra sonic bath. The outer shell can be cleaned with a cloth dipped in silencer cleaner detergent or oil • All parts need to be dry before the assembly • All seals and threads need to be treated with a heat resistant lubricant (copper paste) @contentTea>
• The damping element can bue cleaned by submerging it in water with a detergent or in a ultra sonic bath. The outer shell can be cleaned with a cloth dipped in silencer cleaner detergent or oil • All parts need to be dry before the assembly • All seals and threads need to be treated with a heat resistant lubricant (copper paste) @contentTea>
• Place the housing on a table and insert the end cap and blast baffel • Assure the concentricity and press against the spring pressure into the locking mechanism • Hold everything in place while inserting the chamber element @contentTea>
• Place the housing on a table and insert the end cap and blast baffel • Assure the concentricity and press against the spring pressure into the locking mechanism • Hold everything in place while inserting the chamber element @contentTea>
• Fasten the blast baffle with the multitool and ensure that the blast baffle and end of the silencer are on the same level!@contentTea>
• Insert the other end cap, with the writing on the outside @contentTea>
• Fasten the blast baffle with the multitool and ensure that the blast baffle and end of the silencer are on the same level!@contentTea>
• Insert the other end cap, with the writing on the outside @contentTea>
• Fasten both end caps with the multitool • A DMC code on the multitool will guide you to the mounting tutrial video @contentTea>
• Fasten both end caps with the multitool • A DMC code on the multitool will guide you to the mounting tutrial video @contentTea>
About KRONTEC
Discover KRONTEC
Precision down to the smallest detail This is the credo of our approximately 100 highly qualified employees. Professional teams from all areas of motorsport as well as customers from aviation, aerospace and medical technology have appreciated our know-how and the high quality of our work for over 30 years. From prototype construction to small series production.
Precision down to the smallest detail This is the credo of our approximately 100 highly qualified employees. Professional teams from all areas of motorsport as well as customers from aviation, aerospace and medical technology have appreciated our know-how and the high quality of our work for over 30 years. From prototype construction to small series production.
Krontec supports fawn rescue projects
Thousands of fawns and ground-nesting birds are killed or maimed during the annual mowing of meadows. We participated in the acquisition of an appropriately suited drone. A drone is currently the most efficient means of searching for fawns. And who searches finds. A dedicated team of helpers therefore flies over the meadows in the early morning in the regional hunting grounds of our partners and in cooperation with the farmers in order to prevent the mowing death and mutilation.