BALLISTOL Silicone oil spray - Frankonia Wholesale B2B ✓ Germany ✓ International
BALLISTOL Silicone oil spray, 0,2 l
&quality=40)
&quality=40)
BALLISTOL Silicone oil spray, 0,2 l
PRODUCT DETAILS
- ideal for the care and maintenance of CO2 and airsoft guns
- cares, protects, lubricates
- for indoor and outdoor use
- suitable for rubber, plastic and metal
- PTFE, acid and resin-free and does not gum up
That BALLISTOL Silicone oil is the clean alternative wherever rubber, polymers, plastic and metals need material-compatible care - for lubrication and protection. Eliminates squeaking and creaking noises, keeps rubber elastic and prevents them from freezing in winter. Gives plastics back their natural appearance and prevents them from drying out and becoming brittle.
The main areas of application for silicone spray are very broad. Silicone spray is used just as successfully in industry, in the home and in the garden as it is on cars, motorcycles, in leisure time and in the outdoor area.
Silicone spray is PTFE-, acid- and resin-free and does not resinify. It is free of environmentally toxic substances and chlorinated hydrocarbons. Contains biodegradable solvent and ozone-neutral propellant.
Application
Before use, make sure that the surface is dry, clean and free of grease. For dirty and oily parts, it is best to use our degreaser to pre-treat them. Shake the can well shortly before use so that the silicone can be evenly distributed in the carrier solution. Then spray silicone spray evenly from a distance of approx. 25 cm and allow to dry. If necessary, polish again with a soft, clean cloth. The process can also be repeated to increase the effect.
Further product details:
- is a lubricant, release agent, insulating agent and care product
- for mineral oil-free and clean lubrication
- prevents rubber on car doors, freezers, etc. freezing
- reduces wear and dampens noise, e.g., on treadmills
- suitable for sealing and impregnating ignition systems
- for lubricating ski bindings, Bowden cables, etc. m.
- allows wooden drawers to glide perfectly
- lubricates cylinder locks with a thin, non-gumming film
- impregnates textiles, artificial leather, tarpaulins, tents, latex, etc.
- lubricates, conditions, and protects all materials
- prevents rubber from drying out or becoming porous
- leaves no greasy residue and is non-sticky
- protects against moisture, corrosion, rust, and oxidation
- tested material compatibility for all materials
- suitable for indoor and outdoor use
- stain-free lubrication even when in contact with textiles
- eliminates squeaking and creaking noises
- acts as an insulating spray and prevents stray currents
- enables material-compatible care
- is water-repellent, dust-repellent, antistatic, and does not gum up
- creates a stable lubricating film from -50°C to +200°C
- lubricates and protects parts made of rubber, plastic, and metal
- keeps rubber elastic
- restores the natural appearance of plastics
- prevents drying out and embrittlement of rubber and plastics
Application
Before application, ensure the surface is dry, clean, and free of grease. For dirty or oily parts, we recommend pretreating with our degreaser. Shake the can well just before use to ensure the silicone is evenly distributed in the carrier solution. Then, spray the silicone spray evenly from a distance of approximately 25 cm and allow it to dry. If necessary, polish with a soft, clean cloth afterward. The process can be repeated to enhance the effect.
Gefahr: Extrem entzündbares Aerosol. Behälter steht unter Druck: kann bei Erwärmung bersten. Verursacht Hautreizungen. Kann Schläfrigkeit und Benommenheit verursachen. Giftig für Wasserorganismen, mit langfristiger Wirkung. Darf nicht in die Hände von Kindern gelangen. Von Hitze, heißen Oberflächen, Funken, offenen Flammen sowie anderen Zündquellenarten fernhalten. Nicht rauchen. Nicht durchstechen oder verbrennen, auch nicht nach der Verwendung. Vor Sonnenbestrahlung schützen und nicht Temperaturen von mehr als 50 °C aussetzen. Inhalt / Behälter dem Recycling zuführen.