ERA® SILENCER SOB2S – the resilient one, also suitable for the shooting cinema.

The ERA® SILENCER was developed with the aim of achieving the best possible damping with a compact design and the lowest possible weight - and this with full Magnum suitability and a long service life.

The most important requirement for a silencer in hunting use is the most effective possible damping of the muzzle blast to protect the hearing of humans and dogs.

The silencers of the SOB series are designed as telescopic silencers (over-barrel). A part of the damper protrudes backwards over the barrel and very good damping values can be achieved with a small net overall length. In addition, the first shot bang that is usual with other silencers is reduced to an absolute minimum. Recoil and muzzle flash are also significantly reduced.

The ERA® SILENCER is easy to disassemble: the threaded bushings are interchangeable. By exchanging the threaded bushing, the ERA® SILENCER can also be used on other weapons of the same caliber but with different barrel threads. Also included is a protective shield that mounts to the rear end of the over-barrel shock. It protects the barrel thread and the damper from damage from lateral forces and prevents dirt and snow from penetrating. The surface structure ensures significantly less adhesion of powder residues inside the damper. Longitudinal grooves milled on the outside provide the necessary grip during assembly and ensure faster cooling. The stepped design protects the sealing rings, since there is no contact with the powder residues in the outer tube during disassembly. A coating according to MIL-SPEC MIL-A-8625F Type III meets the highest requirements for hardness and corrosion resistance. The ERA® SILENCER offers numerous advantages and is excellently equipped to survive in everyday use when hunting.

10 arguments for the ERA® SILENCER

1. Suitable for shooting cinemas - heavy-duty panel made of stainless steel
2. high attenuation performance – SOB2S up to 31 dB
3. "First-round-pop" minimized - the ERA® SILENCER reduces the "first-round-pop" effect to a minimum thanks to its specially designed panel
4. low net length due to telescopic design - SOB2S net length 105 mm
5. light weight - SOB2S 520g
6. Reduced recoil - due to the particularly large number of baffles, recoil is significantly reduced
7. low muzzle flash - the muzzle flash is almost completely deflected into the interior of the damper, thus significantly reducing the blinding effect on the shooter
8. Interchangeable threaded bushing - thanks to the interchangeable threaded bushing, the ERA® SILENCER can easily be used on other weapons of the same caliber with different barrel threads
9. Step geometry: Less wear and tear on the sealing rings - the step-shaped design prevents damage to the sealing rings, since any contact with the powder residues in the outer tube is avoided when disassembling
10. Surface coating according to MIL-SPEC - meets the highest requirements for hardness and corrosion resistance
11. Suitable for magnums - high-strength aluminum alloys and solid wall thicknesses allow use even with magnum calibres

ERA®LOC version

The silencer is also optionally available with the ERA®LOC quick release fastener. When ordering the ERA®LOC version, you also need the appropriate ERA®LOC barrel thread bush.
The ERA®LOC quick-release fastener allows the silencer to be attached and removed quickly and easily with just a short 60° turn. The very robust thread ensures that the silencer is held securely thanks to the large number of threads. The ERA®LOC thread itself is protected from powder residue by the contact on the front side and guarantees consistent and safe functioning.